So sánh sản phẩm

No. 6312V

No. 6312V

Be the first to review this product ( 0)
  • Giá
  • 0
  • Tình trạng
Order 
no.
B1 Slot Clamping force max.* 
[kN]
H1 Weight 
[g]
SC CAD
79756 13 10, 12, 14 30 0-55 661   CAD
79798 17 12, 14, 16, 18 40 0-70 1494   CAD
79855 21 16, 18, 20, 22 60 0-80 2252   CAD
79913 25 20, 22, 24, 28 75 0-100 3635   CAD
376475 25 20, 22, 24, 28 75 0-100 4335   CAD
* Specified clamping forces in optimal clamping position (smallest distance from the clamping screw to the clamping point). Clamping forces can vary depending clamping, strength class of the clamping screw and condition of the thread (lubrication).
Application:
The crocodile is used for all clamping tasks over T-grooves and Nuten und threaded holes. The compression piece and the counterholder are connected undetachably to the clamping shoe, and so the crocodile can be used quickly. The clamping plate is equipped with two clamping surfaces and can be easily turned depending on use. As a result, all non-cutting and cutting processing types (e.g. injection moulding and presses) are covered.
Note:
Your choice of tensioning screws DIN 787, stud screws DIN 6379 and the cylinder screws DIN 912 can be used for clamping. Greater clamping heights can be achieved through use of the support extension no. 6312S.
Advantage:
- Possibility of variable and quick adjustment at a distance from the workpiece 
- Use in all areas of cutting and non-cutting processing 
- Especially suitable for use on injection moulding machines and presses 
- No additional supports to achieve the required clamping height 
- Compression piece and counterholder are connected undetachably to the clamping shoe 
- The crocodile clamping element can be variably expanded for every clamping height.
Dimensions:
 
Order 
no.
A A1 A2 B2 x L B3 E1 E2 H2 K
79756 27 17 12 44x115 30 25 30 18 11
79798 36 21 17 55x150 41 35 36 20 12
79855 42 27 20 62x187 30 44 44 30 14
79913 51 34 24 70x235 30 60 47 31 17
376475 56 35 24 73x285 30 62 51 35 17

"Crocodile" clamp with counterholder, adjustable

Continuously adjustable, tempered, galvanized, with undetachable compression piece and back support. 

Tags:
Products in the category
  • No 6802

    No 6802

    Vertical acting toggle clamp

    with open clamping arm and vertical base. 
    Galvanized and passivated. Rivets made of stainless steel, which, for sizes 2 to 6, run in hardened bushings. Bearings are pre-lubricated. 
    Ergonomic, oil-resistant handle with large grip surface and soft components. Safety clamping piece with finger protection. Lock washer for the thrust bolt at the end of the clamping arm. 
    Complete with tempered, galvanized clamping screw no. 6890

  • No. 6311

    No. 6311

    clamp, light design

  • No. 6310

    No. 6310

    Clamps with plastic cap

    with captive compression piece

  • No. 6312S

    No. 6312S

    Support extension

    Hardened and zinc-plated steel, hardened support screw, strength class 8.8. Consisting of compression piece, support screw and fastening bolts. 

  • No. 6312VI

    No. 6312VI

    "Crocodile" clamp with counterholder, adjustable

    complete with stud bolt No. 6379I, washer DIN 6340 and nut DIN 6330B. Infinitely adjustable, tempered, galvanised with captive compression piece and counter bearing.

  • No. 6312V

    No. 6312V

    "Crocodile" clamp with counterholder, adjustable

    complete with clamping bolt DIN 787, washer DIN 6340 and nut DIN 6330B. Infinitely adjustable, tempered, galvanised with captive compression piece and counter bearing.

  • No. 7600BF

    No. 7600BF

    Mounting kit

    Comprising cylinder screw DIN 6912, strength grade 12.9 and T-groove key DIN 508.

  • No. 7600D

    No. 7600D

    Pressure pad

    Complete with dowel pin.
    Stainless steel.

  • No. 7600

    No. 7600

    Power Clamp, sliding

    Steplessly adjustable clamping element made of alloyed tempered steel in forged, galvanised design. 
    Complete with mounting.
    Compression piece in smooth and riffled variant optionally available. 

  • No. 6904-25

    No. 6904-25

    Air-Hydraulic Pump

    max. operating pressure 500 bar

My Cart (0)
  • There are no items in your shopping cart
<php _e('Click to Call','call-now'); ?>

0987 824 409