Số 2, ngách 83, ngõ 61 Phố Trạm, tổ 14, P. Long Biên, Q. Long Biên, Hà Nội
| Order no. |
Size | F1 [kN] |
Clamping screw |
Weight [g] |
SC | CAD |
|---|---|---|---|---|---|---|
| 91330 | 2 | 2,5 | M 6x 50 | 320 | CAD | |
| 90902 | 4 | 10,0 | M12x 80 | 1320 | CAD | |
| 90910 | 6 | 12,0 | M12x110 | 2120 | CAD | |
| 90928 | 8 | 20,0 | M12x110 | 4060 | CAD |
Note:
These heavy vertical toggle clamps are especially suitable for production equipment and fixtures.
 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Dimensions: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Heavy vertical toggle clamp
with vertical base and mounting holes.
Reamed and case-hardened bearing bushes.
Hardened, ground and permanently-lubricated pins. Clamp nuts on lever arm to vary friction in movement. Material: steel, blued. Lever arm made of cast steel, blued. Handle of red, oil-resistant plastic.
Complete with tempered, galvanized clamping screw no. 6885.
Vertical acting toggle clamp
with open clamping arm and vertical base.
Galvanized and passivated. Rivets made of stainless steel, which, for sizes 2 to 6, run in hardened bushings. Bearings are pre-lubricated.
Ergonomic, oil-resistant handle with large grip surface and soft components. Safety clamping piece with finger protection. Lock washer for the thrust bolt at the end of the clamping arm.
Complete with tempered, galvanized clamping screw no. 6890
Support extension
Hardened and zinc-plated steel, hardened support screw, strength class 8.8. Consisting of compression piece, support screw and fastening bolts.
"Crocodile" clamp with counterholder, adjustable
complete with stud bolt No. 6379I, washer DIN 6340 and nut DIN 6330B. Infinitely adjustable, tempered, galvanised with captive compression piece and counter bearing.
"Crocodile" clamp with counterholder, adjustable
complete with clamping bolt DIN 787, washer DIN 6340 and nut DIN 6330B. Infinitely adjustable, tempered, galvanised with captive compression piece and counter bearing.
"Crocodile" clamp with counterholder, adjustable
Continuously adjustable, tempered, galvanized, with undetachable compression piece and back support.
Mounting kit
Comprising cylinder screw DIN 6912, strength grade 12.9 and T-groove key DIN 508.
Power Clamp, sliding
Steplessly adjustable clamping element made of alloyed tempered steel in forged, galvanised design.
Complete with mounting.
Compression piece in smooth and riffled variant optionally available.
 |
CÔNG TY TNHH THƯƠNG MẠI THIÊN ÂN VIỆT NAM |
Địa chỉ: Số 2, Ngách 83, Ngõ 61 Phố Trạm, Tổ 14, P. Long Biên, Q. Long Biên, TP. Hà Nội, Việt Nam
Hotline: 024 3 216 1984/024 3 872 2836 - 0987 824 409 
Email: kinhdoanh1.thienan@gmail.com