So sánh sản phẩm

No. 6904-25

No. 6904-25

Be the first to review this product ( 0)
  • Giá
  • 0
  • Tình trạng
rder 
no.
Article no. Pneum. 
pressure min. 
[bar]
Pneum. 
pressure max. 
[bar]
Oil capacity usable horizontal 
[l]
Oil capacity usable vertical 
[l]
Q max. 
[cm³/min]
Weight
[Kg]
SC CAD
69450 6904-25 2,8 10,0 2,1 1,5 1400 6,3   n.v.
Design:
Compact compressed air operated hydraulic pump for double acting circuits. Robust plastic tank. The motor is protected against contamination by an air filter at the inlet and an internal oil filter. Safety valve to prevent overpressure and sound absorbers are fitted. Oil supply via threaded port.
Application:
The air-hydraulic pump can be used as drive element for small hydraulic and assembly equipment. Safety is guaranteed by automatic pressure compensation. The air-hydraulic pump is designed for the assembly of valves with connection diagram CETOP 03, i.e. with the option to control single or double acting cylinders. The changeover can be made manually, pneumatically or electrically.
Features:
The large air/oil intensification ratio allows for high hydraulic pressures even with small air pres-sure. Low weight allows for mobile application. The pump can be mounted horizontally or vertically. Applications in hazardous environment is possible.
Note:
Optionally, pumps with other operating pressures are available upon request. Please observe proper venting of the single acting system. All tolerances other than specified refer to DINISO 2768 mittel (medium).

Air-Hydraulic Pump

max. operating pressure 500 bar

Tags:
Products in the category
  • No 6802

    No 6802

    Vertical acting toggle clamp

    with open clamping arm and vertical base. 
    Galvanized and passivated. Rivets made of stainless steel, which, for sizes 2 to 6, run in hardened bushings. Bearings are pre-lubricated. 
    Ergonomic, oil-resistant handle with large grip surface and soft components. Safety clamping piece with finger protection. Lock washer for the thrust bolt at the end of the clamping arm. 
    Complete with tempered, galvanized clamping screw no. 6890

  • No. 6311

    No. 6311

    clamp, light design

  • No. 6310

    No. 6310

    Clamps with plastic cap

    with captive compression piece

  • No. 6312S

    No. 6312S

    Support extension

    Hardened and zinc-plated steel, hardened support screw, strength class 8.8. Consisting of compression piece, support screw and fastening bolts. 

  • No. 6312VI

    No. 6312VI

    "Crocodile" clamp with counterholder, adjustable

    complete with stud bolt No. 6379I, washer DIN 6340 and nut DIN 6330B. Infinitely adjustable, tempered, galvanised with captive compression piece and counter bearing.

  • No. 6312V

    No. 6312V

    "Crocodile" clamp with counterholder, adjustable

    complete with clamping bolt DIN 787, washer DIN 6340 and nut DIN 6330B. Infinitely adjustable, tempered, galvanised with captive compression piece and counter bearing.

  • No. 6312V

    No. 6312V

    "Crocodile" clamp with counterholder, adjustable

    Continuously adjustable, tempered, galvanized, with undetachable compression piece and back support. 

  • No. 7600BF

    No. 7600BF

    Mounting kit

    Comprising cylinder screw DIN 6912, strength grade 12.9 and T-groove key DIN 508.

  • No. 7600D

    No. 7600D

    Pressure pad

    Complete with dowel pin.
    Stainless steel.

  • No. 7600

    No. 7600

    Power Clamp, sliding

    Steplessly adjustable clamping element made of alloyed tempered steel in forged, galvanised design. 
    Complete with mounting.
    Compression piece in smooth and riffled variant optionally available. 

My Cart (0)
  • There are no items in your shopping cart
<php _e('Click to Call','call-now'); ?>

0987 824 409