So sánh sản phẩm

No. 7600

No. 7600

Be the first to review this product ( 0)
  • Giá
  • 0
  • Tình trạng
Order 
no.
Size = 
clamping force 
[kN]
G Slot H min. H max. V Weight 
[g]
SC CAD
553087 30 M12 14 6 68 13-110 2013   n.v.
553088 30 M16 18 6 68 16-114 2045   n.v.
553333 43** M16 18 5 80 16-134 3158   n.v.
* Specified clamping forces in optimal clamping position (smallest distance of the clamping screw to the clamping position). Clamping forces can deviate depending on the clamping, strength class of the clamping screw and condition of the thread (lubrication).
** Size 43 kN available from June 2016.
Application:
1. Position and fasten carrier element on the tool table.
2. The base element can be pushed into the desired position on the carrier element. After this is done, it is ready for operation.
3. The height of the clamping arm can be adjusted continuously by actuating the adjusting bolt, which clamps the workpiece.
4. The very robust design enables quick and easy clamping.
Note:
To reduce wear to the adjusting bolt, we recommend using AMF screw compound No. 6339. It possesses a synergistic combination of highly-effective solid lubricants and is heat-resistant and does not wash out.
Advantage:
- Low installation height
- Up to 30 kN or 43 kN clamping force
- Continuously adjustable in height and length
- Use in T-grooves 14-24 mm or grid pallets M12 and M16
- 2 thrust-piece variants
Dimensions:
 
Order 
no.
Size A A1 B B1 G1 L L1 L2 SW
553087 30 36 85 54 18 M16 135 13 25 8
553088 30 36 85 54 18 M16 135 16 28 8
553333 43 42 105 60 20 M20 155 16 32 10

Power Clamp, sliding

Steplessly adjustable clamping element made of alloyed tempered steel in forged, galvanised design. 
Complete with mounting.
Compression piece in smooth and riffled variant optionally available. 

Tags:
Products in the category
  • No 6802

    No 6802

    Vertical acting toggle clamp

    with open clamping arm and vertical base. 
    Galvanized and passivated. Rivets made of stainless steel, which, for sizes 2 to 6, run in hardened bushings. Bearings are pre-lubricated. 
    Ergonomic, oil-resistant handle with large grip surface and soft components. Safety clamping piece with finger protection. Lock washer for the thrust bolt at the end of the clamping arm. 
    Complete with tempered, galvanized clamping screw no. 6890

  • No. 6311

    No. 6311

    clamp, light design

  • No. 6310

    No. 6310

    Clamps with plastic cap

    with captive compression piece

  • No. 6312S

    No. 6312S

    Support extension

    Hardened and zinc-plated steel, hardened support screw, strength class 8.8. Consisting of compression piece, support screw and fastening bolts. 

  • No. 6312VI

    No. 6312VI

    "Crocodile" clamp with counterholder, adjustable

    complete with stud bolt No. 6379I, washer DIN 6340 and nut DIN 6330B. Infinitely adjustable, tempered, galvanised with captive compression piece and counter bearing.

  • No. 6312V

    No. 6312V

    "Crocodile" clamp with counterholder, adjustable

    complete with clamping bolt DIN 787, washer DIN 6340 and nut DIN 6330B. Infinitely adjustable, tempered, galvanised with captive compression piece and counter bearing.

  • No. 6312V

    No. 6312V

    "Crocodile" clamp with counterholder, adjustable

    Continuously adjustable, tempered, galvanized, with undetachable compression piece and back support. 

  • No. 7600BF

    No. 7600BF

    Mounting kit

    Comprising cylinder screw DIN 6912, strength grade 12.9 and T-groove key DIN 508.

  • No. 7600D

    No. 7600D

    Pressure pad

    Complete with dowel pin.
    Stainless steel.

  • No. 6904-25

    No. 6904-25

    Air-Hydraulic Pump

    max. operating pressure 500 bar

My Cart (0)
  • There are no items in your shopping cart
<php _e('Click to Call','call-now'); ?>

0987 824 409